DGR CUSTOM BUILT M1 GARANDS
WITH SEMI-FANCY WALNUT STOCK SETS
 

Semi-Fancy Walnut With Clear T-1 Finish


Semi-Fancy Walnut T-1 With Brown Stain Finish


Semi-Fancy Walnut With Brown Stain and T-2 Finish


Semi-Fancy Walnut With Brown Stain and T-1 Finish

C&R or FFL Required

  • New Criterion Barrel in 30-06 or .308/7.62MM
  • Semi-Fancy Walnut stock sets fitted, sanded to 600 grit and hand rubbed oil finish. Click Here for Wood Finishes Details  
  • We only use op rods that been rebuilt to new specs. with new pistons and rebuilt receiver studs
  • New butt plates
  • Most parts gauged and all parts inspected
  • Meticulous metal preparation before the metal is finished  
  • All metal Parkerized with the exception of the stainless steel gas cylinder which receives a bake on lacquer finish
  • New springs, which includes a stainless steel op rod spring  
  • Set timing
  • During assembly, all parts are lightly coated with rust inhibiting lubricant
  • Letters and numbers highlighted (if you do not wish to have them highlighted please let us know)  
  • Bore sighted and sights adjusted   
  • DGR guarantees the rifle will function and provides a one year warranty   


Additional Options


New Stock and Hand Guard Metal

(Click On Picture To Enlarge)

Included  ($55.00 value)

When Ordering 308/7.62mm Cal. A Bullet Guide Block Is Needed

Add $15

Reproduction WWII Lock Bar Rear Sight

Add $18

See DGR's Accessories Page for Additional Items for the M1

CLICK HERE TO SEE FINISHED EXAMPLES OF M1'S
WITH DIFFERENT WOOD TYPES/FINISHES.


Comparing CMP’s Special Grade to DGR’s Standard Grade builds

CMP’s estimated delivery time is 60 days.

DGR’s estimated delivery time is 30-40 days.

CMP’s stock set comes from Dupage and has no additional fitting done, no additional sanding or staining.

DGR also uses the Dupage stock sets, but have additional fitting to improve the rifles accuracy and function.  DGR’s stock sets are sanded down to 220 grit for a uniform appearance and are stained and then oiled.  With DGR the customer has the choice of red or brown stain.  DGR also offers other stock sets of higher-grade wood, different manufacture (Wenig) and different finishes.

CMP advertises “new production barrel” which at this time is the Criterion military contoured barrel.

DGR also uses the Criterion military contoured barrel, but offers the customer other choices in barrel manufacture.

CMP advertises that “receiver and most other parts are refinished USGI, but some parts may be new manufacture”.

DGR’s metal, even new parts will get DGR’s Mil-Spec Parkerizing finish (with the exception of the stainless steel part which get a baked on finish).  Our Parkerizing will not be over 60 years old and colors will closely match.

Other advantages of a DGR M1.

1)  DGR uses rebuilt op rods to assure against the rifle failure to function.  This is a vital part of the gas-operated rifle and should be in like new condition to assure function for a long time.

2)  DGR uses new springs.

3)  Rifle is assembled and fitted for best accuracy.

    4)  DGR offers a one year warranty.


 (Click Here For Billing or Ordering Information Request)

All prices subject to change without notice.

visa.gif (1517 bytes) mastercard.gif (2272 bytes)  Visa, MasterCard, Discover, money orders, cashier checks and personal checks are also accepted.  All orders are subject to a 3% processing fee.

Satisfied customers from Europe, Canada and in every state of the United States.

Licensed FFL Dealer, Members of the NRA, GCA, and Oak Ridge Sportsman
  Club (A CMP Affiliate Club).


An email sent to us:

Tom's wife Betty writes, I was upstairs changing when I heard Tom say, "oh baby your so beautiful! I missed you and you look so good. You smell good too! And you feel great!"...yep, I ran downstairs to see who he was talking to and found he was talking to the gun you had built for him!

I'm glad you made him so happy, now if I could get him to put it down and take me out to dinner! 

Thank you, Betty


How to Contact Us:

Dean's Gun Restorations  
499 Meredith Road
Caryville, TN 37714
 
Office Hours:
Monday - Friday 
 9:00 AM - 4:00 PM Eastern Time
 
Telephone:  (423) 562-2010
Michelles Email  michelle-dgr@comcast.net
 
"LIFE'S TOO SHORT TO SHOOT AN UGLY GUN!"

* Please feel free to email any questions or suggestions  *


RETURN TO TOP

CLICK HERE TO SEE FINISHED EXAMPLES OF M1'S
WITH DIFFERENT WOOD TYPES/FINISHES.